Видео

Bought my mvmdx at like 225000 I think now I'm at 250000. I don't have a scan tool yet and I need to do a valve adjustment, will do a TB cleaning along the way. Is there an app for a scan tool or is there a chance I won't get a high idle after working on the car?

I have a 52 Chevy and when I push the start button I just hear the soft Bang sound (click) Brand-new battery.. can I just remove and get the solenoid tested or do I have to take both starter and sel? Thanks

Well said.

Technically speaking, speed bumps cause increased wear on suspension components (compared to if it wasn't there at all) for very little gain in pedestrian safety. They are also worse for the environment, causing braking and acceleration. Contrary to popular belief, speed bumps rarely, if at all, slow drivers down. Hell, in my experience they actually make those drivers that do speed go faster because you are forcing them to slow down. They just don't work.

This guy's voice is radio quality

I didn't consider this "high mileage" topic beforehand. I believe I'm going to fall back and wait on the right timing for a car. God im waiting.

This makes sense

Id add Mazda to the Honda or Toyota list, if its with their new 6 speed transmission. Mazda is very reiliable not that they partner woth Toyota instead of Ford. And finally make their of non CVT transmission.

Is it possible for water pumps to intermittently work? I have a '98 Chrysler Sebring that I only drive a few miles at a time before it starts to overheat. The radiator isn't clogged, there was no leaking, no whining noise. At first I thought it was a stuck closed thermostat until one day, out of the blue, it stopped overheating and there was normal flow in radiator and heater core. What I did hear was a sound much like knocking rods. Occasionally, I would later lose cabin heat and notice temperature rise. I figured it had to be the water pump since I have never heard of a functioning open thermostat closing while driving. The next day, circulation returned, along with the knocking sound from the area of the pump. It is not an easy fix because motor mounts have to be removed and the engine supported to replace the water pump.

is this the same part on a LS460 Lexus ??? Looked at engine didn't see that piece

I bought a used California Snowbnird's K1600 GMC Sierra Crew Cab @ 43,000 miles --- and I was concerned with the noise I heard in the front hubs - or so I believed. I bought two hubs and one almost-sunny day I jacked the truck up and spun the wheels - wiggled them - and generally tried to force them to make ANY noise at all. Nope - no noise. THEN I noticed that the tires had been siped! There's the noise, lady! I will never allow this to happen to me again - even though these siped tires came on the vehicle and I'll run them down and replace then in the late Fall for new - unsiped tires. Interestingly, as a retired shop owner who had a Remington Tire dealership --- I am on to the tire selling games --- but siping was new to me - especially here when I now live in Montana. What I DO know is that it is illegal to cut, burn, regroove or modify any tires in California.

People use to say when I was a kid the engine would stop working if it gets to high and I use to believe that

Thanks for the great informative video.

Totally true. I drove a corolla to 600km, to the bone. With Honda's and Toyota's well maintained, no risk.

Great tips

Anyone have the hardware kit part number? I have a Q60RS that shakes under breaking and I've replaced the rotors twice and need to do it again already

great wisdom in just a min thank you sir.

Just saw a clip on instagram and immediately recognized his voice. A wealth of knowledge!

Hello. I have been puzzled with my 2004 f150. I have changed the fuel pump driver module, and it still won't start. I have no power to the module. I have to keep turning the key on and off until I hear the module kick on. The truck will run perfectly until I kill it, and then I have to repeat the on, off procedure until I hear the pump kick on. This is driving me crazy.

I’ve been told 3 drain and fills a week apart gets most of the fluid. I’ve had problems with flushing them.

Rip Pat. I grew up watching MW and my son now watches.

Just got charged a lot for my TBI to be cleaned yesterday. Honda 2019. Now I feel better that it was actually a preventative measure to take.

Whats wrong with this guy?

I purchased a 2016 Toyota Tacoma for 20 Grande with 122,000 Mi on it and it's one of the best vehicles I've ever owned today its 143,000 Mi and runs like brand new! If you think a 100,000 MI is grounds for a new vehicle you're crazy.

I have an automatic do I have to put it in neutral in order to turn my crankshaft to find out if I have a

I bought a 1997 Toyota Camry LE v6 from a tow yard with 278,800 miles on it and it’s still running good now with 285,590 miles without issues

My dash won't come on when I put my key in an now won't start

I tried to get my tire off. recently I turned the crank and all it did was clicked. I figure it was cranked up too tight.. I got lucky and let the air out of the tire and it. came right down.. By decreasing the tire pressure it. Slightly loosened up the cable.. I was at home when this happened. I was rotating my tires.. If this would have happened on the highway, With a flat tire. , I would have been in trouble.

Very good advice and insights...it's truly the overall condition and care and maintenance of the vehicle that counts. Additionally what does your research or any research on & about the vehicle say, such as accidents & recalls & history & of course required evaluation by independent sources.

My car running cool went for many places no body fixed it i knew this was the problem i want to do my self and try now so its a 1993 Mitzubishi 2.0 dissel hatch back what temperature thermostat need 77 or 82? Please help

Jeep patriot with 190k on it and it's been through a lot but still works... however it died in -60F weather

What if you don't want to run over the speed bump in speed but you saw it too late due to poor visibility?

Locally a rebuilt for my van is $3100 and a re-manufactured is $3500. The re-built has a 1 year warranty and the re-man has a 3 year warranty. That should tell you something. $400 more for a 2 year longer warranty seems the way to go?

My new thermostat doesn't have a bleed hole the guy at the parts store told me to drill a small hole. Is this necessary? Or are they simply different designs and the new one can burp a different way?

Well who knows is the answer

toyota camry accelerator defect

RIP

I just bought a 2017 camry se with 232k miles for 6 grand

ok Goss, I have a 86 Ford club-wagon, it won't get fuel into the rail, it will bring it up to the regulator, but the regulator isn't getting enough vacuum to open the regulator , new regulator by the way,

Straight and direct 💯% just make sure it's taken to a trusted mech. 👍

Video should have been called talking about throttle body lmao

Why the car manufacturer put neutral in a auto trans if neutral has no function at all, N is only for decoration?

Gracias.

As long as the car has a full service it’s a no brainier

Nicely said!

Hi, please i need help to solve a problem on my honda 2017 CRV LX. The vehicle drags when you press the accelerator for more power around 15mph and around 40mph. This delays the vehicle power and does not respond fast and is dangerous if overtaking. At times, if i press the accelerator hard fir more power, it losses power enturely unless i park the vehicle and restart.

Georgia overdrive.

I have a 2010 Toyota Tundra 4.6 engine I keep getting P0453 code i’ve replaced charcoal canister, both injector pumps, both check valves switching valves. All by Toyota parts. Truck is running much better also transmission shifting the way supposed to shift.

Stretch belts are a brilliantly engineering marvel that has taken a 5 min job and turned into a frustrating job needing special tool or zip ties or whatever else somebody has dreamt up. 🤦